Air Jets

Call for price

Air Jets are a type of Air Amplifiers. Air Jets are larger than nozzles and used when a wider area needs to be hit with the amplified air. Air Jets are significantly more efficient than nozzles although often use as much compressed air. These Air Jets are best used to replace pairs of nozzles that are used for part ejection or for blow-off applications that require greater force than that provided by air knives or air movers. Airmasters Air Jets are all made adjustable with a lock ring to assure the security of any gap setting. They have a female 1/8” NPT and made lightweight with anodized aluminum.

Four Different sizes of Air Jets are manufactured with two types of materials, Brass and Stainless Steel. AJ0001B & AJ0002B are the high force jets in Brass and AJ0001S & AJ0002S are the high force jets in Stainless Steel.

Model AJ0001B / AJ0002B / AJ0001S / AJ0002S High Flow Air Jet are physically the same size. The only difference is a larger exit opening for the amplified air flow. The high flow system is used more for cooling and light blowoff while the high force version is used mainly for heavier blowoff applications.

The Sound level for Model AJ0001B / AJ0001S is 80 dBA and for the Model AJ0002B / AJ0002S is 82 dBA at 3ft (0.91mm) at 80 psig (5.6 bar). The AJ0001B / AJ0002B Brass Air Jet and AJ0001S / AJ0002S Stainless Steel Air jet are marked to indicate the size of the air gap and can be easily set and locked into place

Download Brochure
SKU: air-knives-4 Category:

Related products

  • Vortex Tube

    <div class="airmaster"> Vortex tube technology was invented by French physicist Georges Ranque in 1930. Vortex Tubes are devices which generates cold air and hot air by forcing compressed air through a generator. Air enters the vortex tube and is literally split into two parts - cold air at one end, and hot air at the other – all without any moving parts Vortex Tubes have an adjustable valve at the "hot" end which controls the volume of the air flow, and the temperature exiting at the cold end. By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air that exits the cold end of the Vortex Tube. Our Vortex Tubes may also be supplied with a fixed preset "cold fraction" instead of an adjustable valve. Inside is the interchangeable brass "generator" which can alter the air used in the Vortex Tube, and control the temperature ranges you wish to have at the cold and hot ends. There are several ranges of generators for compressed air capacity. A vortex tube can be made in several sizes the smallest operating with 2 to 8 SCFM and the medium size 10 to 40 SCFM and the large size 50 to 150 SCFM. Larger sizes have rare applications due to high energy consumption. Vortex tubes generate temperatures as much as 100 deg F (56 deg C) below the inlet air temperature. These Vortex Tubes are used for different purposes and different applications. </div> <div class="trial-btn"><a class="trigger" href="https://www.agency09.co/staging/aceflow/wp-content/uploads/2024/02/Vortex_Tube.pdf" type="button">Download Brochure</a></div>
    Read more

  • Machine Tool Cooling System

    <div class="airmaster"> AIR-MTC tool coolers are used for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.AIR-MTC tool coolers are made of durable stainless steel and the Vortex tubes inside of them, are also of stainless steel with brass generators. No pieces made of plastic! It can be used in high temperature environments. AIR-MTC tool coolers can improve dry machining operations and assist in pot cooling applications for a variety of industrial machining processes by increasing machining rates and extending tool life. AIR-MTC tool coolers can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations form metals to plastics. Unit is low cost, no electricity, with no moving parts and is essentially maintenance free. The tool cooler is available in various capacities 15, 25, 30 and 40 in addition, there are two versions, a single exit point and double exit point system. Our tool coolers use a strong integrated magnetic base. We recommend using the inlet air-pressure of 5 to 7 Bar </div> <div class="trial-btn"><a class="trigger" href="https://www.agency09.co/staging/aceflow/wp-content/uploads/2024/02/Machine_Tool_Cooler.pdf" type="button">Download Brochure</a></div>
    Read more

  • Airmasters+ Air Knives

    <div class="airmaster"> The AIRMASTERS+ compressed air knives are engineered to deliver high blowing strength while significantly reducing energy consumption and noise levels. Manufactured in Italy with precision machinery, these air knives ensure a uniform flow and consistent force distribution along the entire length. Utilizing the Coanda effect, AIRMASTERS+ air knives draw in a large volume of environmental air with a minimal amount of compressed air, achieving an impressive 1:50 air amplification ratio. </div> <div class="trial-btn"><a class="trigger" href="https://www.agency09.co/staging/aceflow/wp-content/uploads/2024/02/AIR-KNIFE.pdf" type="button">Download Brochure</a></div>
    Read more

  • Adjustable Air Amplifiers

    <div class="airmaster"> Adjustable Air amplifier takes energy from a small volume of compressed air to produce a high velocity, high volume, low pressure output air flow. It is easy to mount and maintains reducing both compressed air consumption and noise levels. Adjustable Air Amplifiers don’t come with Shims, they are manually adjustable with the help of a lock ring. The lock ring can adjust the air flow of the air amplifier, which can help to control the vacuum generated and the air blow off. </div> <div class="trial-btn"><a class="trigger" href="https://www.agency09.co/staging/aceflow/wp-content/uploads/2024/02/Adjustable-Air-Amplifier.pdf" type="button">Download Brochure</a></div>
    Read more